About This

• Support the LED ： Suitable for the PWM monochrome LED Strip Lights like FCOB COB 5630 2835 3528 5630 5730 5050 3014 etc Without IC chip V+ V- Two wires single color LED strip, LED Recessed Lights, LED Chandelier, LED Display, LED Step Lights, LED Wall Lights, LED Spot Lights, RV Dome Lights and so on.
• Work Voltage range ：DC12V-24V, output Max 3A (DC12V3A 36W, DC24V3A 72W), Output Voltage=Input Voltage. IN icon : Power inport. OUT icon : Power Oport. DC plug connector external diameter is 5.5mm, internal diameter is 2.1~2.5mm.
• Easy to Install：Plug play with led strips; Indoor use only. Use come with adhesive tape to fix it to a clean, flat surface. Suitable for Cabinets, Counters, Drawers, Doors, Lighting Accessories.
• Mini IR Sensor Switch : It's a IR Sensor Switch. After connecting it to the DC12V or DC24V LED, use adhesive tape to stick the sensor switch into a clean and flat cabinet.To operate, just wave your hand above the sensor—once to turn the light on, and again to turn it off.
• Note: 1. Please do not wire backwards, otherwise the Mini IR Sensor Switch Controller will overheat and short-circuit. 2. The Mini IR Sensor Switch Controller voltage depends on PWM FCOB Single color LED strip . For example, If use DC12V PWM FCOB single color LED Strip , you should use the DC12V3A 36W power supply to power it.
• Package Content: 1x Mini IR Switch Controller, 1x adhesive tape.

Overview

• Operation Mode : automatic
• Current Rating : 3 Amps
• Operating Voltage : 12 Volts (DC)
• Contact Type : Normally Open
• Connector Type : Dc Plug
• Brand : BTF-LIGHTING
• Switch Type : MOSFET
• Terminal : Solder
• Material : Metal
• Circuit Type : 1-way