About This

• 𝗣𝗲𝗿𝗳𝗲𝗰𝘁 𝗙𝗶𝘁 𝗮𝗻𝗱 𝗖𝗼𝗹𝗼𝗿 𝗠𝗮𝘁𝗰𝗵 - The LIDER humidity sensor switch is designed to be sleek, modern, and fashion-forward. This listing includes 1x LIDER in-wall device and 1x LIDER wall plate LWP-31M-W to form a complete, attractive matching set. For a cohesive look throughout your space, always use LIDER devices and wall plates to ensure a perfect fit and color match.
• 𝗧𝗼𝘂𝗴𝗵 𝗮𝗻𝗱 𝗛𝗲𝗮𝘁 𝗥𝗲𝘀𝗶𝘀𝘁𝗮𝗻𝘁- LIDER humidity sensors are made from Polycarbonate Thermoplastic for durability, longevity, and heat/fading resistance. It has a flammability UL94, V2 rating that protects against high temperatures that cause discoloration and fading over time.
• 𝗨𝘀𝗲𝗿-𝗙𝗿𝗶𝗲𝗻𝗱𝗹𝘆- LIDER humidity sensor switches have user-friendly settings that can be finetuned to user preference. To adjust the humidity and time dials, remove the device’s face cover with a flathead screwdriver. Adjust humidity settings to high, medium, or low sensitivity to humidity. The fan time delay has 5 options available within 5 to 45-minute intervals.
• 𝗧𝘄𝗼 𝗠𝗼𝗱𝗲𝘀- This device features two modes: automatic humidity detection (Auto ON, Auto OFF) and fresh air mode. In automatic humidity detection mode, the fan will activate automatically upon reaching the preset humidity level and will deactivate automatically when the humidity falls below the set threshold. In fresh air mode, the fan will operate with a specified time delay every hour to enhance indoor air quality. Manual override options are available too.
• 𝗦𝗮𝗳𝗲 𝗮𝗻𝗱 𝗥𝗲𝗹𝗶𝗮𝗯𝗹𝗲 - LIDER humidity switches are designed with safety in mind and UL-listed quality. Specifications: GROUND required, no neutral wire required; copper wires only; 120VAC, 60 Hz; 1/4 HP motor; humidity/fan/minutes per hour time delay: 5 to 45 minutes; humidity range: 40%-80% RH; single-pole. 1-year warranty. This listing is for a set of 1x in-wall switch and 1x matching wall plate.

Overview

• Operation Mode : Automatic
• Operating Voltage : 120 Volts (AC)
• Contact Type : Electrical
• Connector Type : Screws
• Brand : LIDER
• Switch Type : Sensor and Fan Control
• Terminal : Screw
• Circuit Type : 1-way
• Mounting Type : Wall Mount
• Actuator Type : Sensor and Fan Control